HomeContacts - HIRING 2012Product InformationCustom MachiningPOCO GraphiteToyo Tanso GraphiteMicroGraph GraphiteMetallic ElectrodesTapping ElectrodesDielectric FluidsEDM Sinker FiltersOther ProductsClearance

CUSTOM MACHINING - GRAPHITE - EDM SINKER SUPPLIES

Many Charmilles machines use the CH56P filters.  These are plate-style filters with no outer case and a handle for picking up the filters.  They are sold in case of 6 filters. 

F00550.JPG

F00550 Filter CH56P for Charmilles sinkers

Mitsubishi M25, M, J and V series sinker EDM machines use these 5 microns filters, sold each.  They are 1-1/4" ID x 10-1/4" OD and 13-1/2" tall. 

F00795.jpg

            F00795

Mitsubishi EA, VX and EX series machines use the F00817 (5 micron) or F00900(10 micron) filters.  Sold each.  They have an 12" OD and are 13-1/2" tall.  The coupler is available as a separate item, F00817Q and is re-usable. 

See the notes below for the filters for the EA12V, which has a similar, but shorter, filter. 

F00817-F00900Top.jpg

  F00817 & F00900 Top

Mitsubishi EA12 and VA10 machines use a filter that is similar to the F00817/F00900, but it is shorter.  It has a 12" OD and is 11-1/2" tall.  (Not pictured - our part number F00811).

F00817-F00900Bottom.jpg

F00817/F00900 Bottom

 

Makino EC3025, EC3040, EC7050, EDF2629, EDNC and EDGE series sinkers all use this F00790 filter.  We stock the 5-micron version of this filter - it is also available in 10 micron and with an optional metal wrap.

F00790.jpg
F00790 for Makino EDM sinker machines

Our F00670 filter replaces the "Luber Liner EDM filters" in several EDM machines.  This is the extended life version of this filter.  Dimensions ar 7-11/16" OD x 7/8" ID x 15-3/32" H. 

 

F00670.jpg